Check-out car Bridges are widely used in large and medium-sized bridge diseases and preventive maintenance inspection work, such as the bridge below to conduct a comprehensive inspection, repair and maintenance of each structure (paint, sandblasting, installation, remove), including the bridge girder crack detection and the whole bridge beam bottom bearing inspection maintenance, also can install and maintain pipelines and cables under the bridge.
Bridge inspection car rental

Main performance and features:

1. The bridge detection vehicle only occupies one lane when working and does not affect the passage of other vehicles.
2. The chassis of the bridge detection operation vehicle adopts a well-known brand, with large carrying capacity, strong power, superior performance and good stability.
3. The bridge detection operation vehicle adopts advanced amplitude variation mechanism and platform extension mechanism, and the auxiliary frame and rotary base adopt unique box-type structure form to ensure the smooth and safe operation of the product.
4. Adopt hydraulic drive self-propelled system to improve product operation efficiency.
5. Equipped with spare gasoline engine system and generator system to provide convenience for detection.
6. The hydraulic system design is advanced, the components and components are all adopted the well-known brands at home and abroad, safe, reliable, and easy to operate;
The hydraulic cylinder adopts the hydraulic cylinder produced by the professional supporting hydraulic cylinder parts factory, and all the cylinder seals are imported Parker seals.
7. The important structural parts are made of imported steel with high yield strength. The structural form is optimized after multiple finite element analysis and verification, so as to ensure the safety and reliability of amplitude transformer, truss, working platform and rotary frame.
8. Equipped with cameras, intercom system and other communication equipment, it provides convenience for communication between cab and working platform personnel.

I. daily safety specifications are as follows:

1. Bridge inspection vehicle is a special vehicle used for bridge inspection. The driver and operator must be driven and operated by personnel designated by the company.
2. Drivers and operators should carefully understand the operation instructions of bridge inspection vehicles and master the performance and operation methods of vehicles.
3. Before operation, each system of the bridge inspection vehicle should be carefully inspected. If any fault is found, it must be repaired in time, and the cause of the fault must be recorded and notified to the company.
4. After the completion of each project, attention should be paid to the maintenance and cleaning of vehicles.
Bridge inspection vehicle rental

Ii. Safety specifications at work are as follows:

1. Operators should concentrate, prevent misoperation and strictly prohibit alcohol after operation.
2. Strictly follow the required road construction layout control when parking.
3. Pay attention to whether the supporting legs are in place before the bridge inspection vehicle starts the working platform;
When launching the work platform, the rear should wave the red flag to remind the traffic.
4. When operating the handle, it should be stable, not fast and violent, so as to avoid excessive inertia swing of the operating arm and accidents.
5. Strictly follow the technical parameters and operation scope stipulated by the equipment.
6. During operation, operators on the platform should pay attention and remind the construction personnel to be in a safe position every time they move.
7. During operation, operators should pay attention to the safe distance between the platform, arm and obstacles such as high and low voltage conductors, telephone lines, buildings, trees and billboards.
8. The on-duty driver shall be responsible for the ground and pay attention to the safety and protection of the passing vehicles.
9. In the process of operation, if any abnormal problems are found in the vehicle, the work shall be stopped immediately, and the work shall not continue until it is inspected or repaired.
10. If the hydraulic system fails and the operating arm fails to operate, the operator shall try to evacuate the personnel on the operating platform safely and notify the professional maintenance personnel to deal with it.
11. After the completion of the operation, the operation platform, the operation arm shall be reset, the supporting leg shall be folded, and no problems shall be found around the vehicle before starting the operation.

Key words: bridge inspection vehicle rental bridge inspection vehicle rental bridge inspection vehicle